Application page

Shrink wrapping machine for printed cartons

Printed cartons need a neat, consistent shrink finish without scuffing the surface or distorting the pack. Lancing UK can review carton dimensions, finish requirements and output to match an L sealer and heat tunnel route.

Shrink wrapping machine for printed cartons
Shrink wrapping machine for printed cartons from Lancing UK.

Key checks for shrink wrapping machine for printed cartons

Printed cartons need a neat, consistent shrink finish without scuffing the surface or distorting the pack. Lancing UK can review carton dimensions, finish requirements and output to match an L sealer and heat tunnel route.

  • Gloss or matt printed cartons
  • Book and media cartons
  • Cosmetic boxes
  • Electronics boxes
  • Promotional cartons

Keep the carton square

Cartons should remain stable through the sealing and tunnel stages. Light boxes, glossy cartons and narrow products may need careful transfer and film control.

Retail presentation

For retail cartons, the aim is usually a clear, tight finish with tidy seals and controlled film waste. The sealer, film and tunnel settings must work together.

Information for quotation

Send carton sizes, board finish, weight, desired seal position and example photos. This makes it easier to avoid under-sizing the aperture or tunnel.

Details to send for a useful recommendation

Product rangeLargest and smallest pack dimensions, product weight, photographs and notes about pack stability.
Production targetRequired packs per minute, daily volume, shift pattern and expected changeover frequency.
Film and finishPreferred film type if known, presentation standard, seal position and any retail requirements.
Site informationAvailable floor space, power, compressed air, access route, conveyor height and downstream packing method.

FAQ

Shrink wrapping machine for printed cartons FAQs

Will shrink film damage printed cartons?

Correct machine settings and film selection help protect carton presentation, but samples should be checked where finish is critical.

Can the seal be positioned away from the front face?

Seal position depends on product orientation and machine setup. It should be discussed during specification.

Do printed cartons need POF film?

POF is often used for presentation wrapping, but the final choice depends on pack and application.